Remu logo

Screening buckets - Excavator attachments
for screening, mixing and processing

Do you have piles of topsoil, peat, coal, dirt or compost? - A screening bucket is just the right attachment to process your material.

REMU screening buckets have a long history dating back to the late eighties. Recent models have gone through rigorous development. Our customer focused development process keeps us on track and ensures continuous improvement which helps us to create products which solves real material processing problems and fulfil customers’ requirements.


What can you process with a screening bucket?

Preparation of topsoil, composting, and recycling are the most common applications of screening buckets. The screened fraction obtained can be classified as a clean, high-quality soil free of oversize stone, etc. Buckets can also be used to mix sand, clay and compost to achieve the desired consistency required for a specific use.

Screening organic waste

Screening buckets can process various organic materials. This bucket in Spain is used for screening and crushing biomass which is a waste stream output from the olive oil production process.

Material: industrial waste stream including fruit stones, sticks and leaves
Objective: Crush & screen the material for feeding biomass boilers
Bucket model: EE4290
Blade model: 4304
Blade thickness and spacing: 16mm /24mm

Screening bucket screening organic waste
Screening bucket screening organic waste

Screening Topsoil

Preparing topsoil with screening buckets has long been a common application in northernly countries and is becoming more frequent in other areas as well. The benefits of processing materials onsite instead of transporting them, is also recognized in the USA. Producing topsoil is one of the most common applications. With our blade screen technology you can separate stones, wooden sticks and other unwanted particles from the soil. Blades also mince up the lumps in the material.

Material: topsoil
Objective: Separate the stones and sticks and other oversized particles to prepare the topsoil for landscaping. Maximum particle size 28 mm
Bucket model: EP 4150
Blade Model: 2001
Blade thickness and spacing: 16mm/34mm

Screening bucket screening topsoil

Aerating and Mixing Compost

Mixing and aerating organic waste piles will speed up the composting process. More aggressive blades, such as screening-crushing blades, break the material into smaller particles to catalyze the process. Composition can vary from very moist to dry, depending on the type of material and how advanced the composting process is. In the early stages of the process, a bucket with very large gaps between the blades can be used to mince up particles and aerate the material whilst later in the process the compost can be screened using a bucket with narrow blade spacing between the screening blades to separate any remaining oversized particles from the end product. The screening bucket are compact and are easy to bring inside any composting installations.

Material: Dried and composted sewage sludge
Objective: Remove remaining oversized particles from composted material
Bucket model: EP 4150

Screening bucket aerating and mixing compost
Screening bucket aerating and mixing compost

Recycling Demolition Waste

Onsite processing of demolition waste reduces the amount of material sent to landfill. The PD 3160 was used at the demolition site of an old hospital in the UK.

Material: Gravel, constructions waste
Objective: Separating oversized particles and preparing the material for reuse onsite
Bucket model: PD 3160
Blade Model: 4304
Blade thickness and spacing: 16mm/24mm

Coal processing

Screening buckets with aggressive blade models can easily process coal and break it down to a smaller particle size. In the UK coal was processed with the EE 4220, which is the second largest of our models of bucket.

Objective: screening particles size for further use
Bucket model: EE 4220
Blade model: 4311
Blade thickness and spacing: 16mm/ 74mm

Screening bucket coal processing
Screening bucket coal processing

Gypsum Processing

The recycling of gypsum board often requires, that the material is first crushed down to a smaller particle size. In Washington, USA, gypsum is crushed with a Remu XO2150 bucket  equipped with screener-crusher blades. The crushed material is then reused as an agricultural soil additive.

Objective: Crush recycled gypsum board for further use
Bucket model: XO2150 with SC module
Blade model: 2304
Blade thickness and spacing: 10 mm/ 20 mm | 3/8″minus

Screening bucket gypsum processing
Screening bucket gypsum processing

Soil stabilization

Soil characteristics can be enhanced to meet the required engineering specifications by adding stabilizing agent like fly ash, lime fly ash, cement or other stabilizers. With our screening buckets the stabilizing can be done on-site by mixing just the right amount of stabilizer to the soil.

Screening buckets soil stabilization
Screening buckets soil stabilization
Screening bucket visualisation

The operating principle of shaft screens

REMU screening buckets have between 2 and 4 rotators powered by hydraulic motors. The spinning motion of the rotators and the carefully designed shape of the blades create movement that effectively separates the fine material, which drops through the bucket, and oversized particles, which remain inside the bucket. Because of this up and down movement, even material that is moist and thus hard to process with vibrating or sifters screens, is easy to process with the REMU blade screens.

Screening bucket visualisation

Blade designs

Our blade designs can be divided into two groups:

  • Screening blades genuinely the materials without breaking up large particles thus avoiding them passing into the screened product.
  • Aggressive blades are designed to mince and break up materials like glass, roof tiles, root lumps

Counter blades

Comb counter blades are designed purely for screening and separating the material while aggressive counter blades are used for rough material and to help mince up the particles and lumps.

Cleaning scrapers

Blade screen technology is the best choice for moist materials. Rotating blades make the material move up and down while cleaning scrapers, constantly cleaning sticky material off the shafts.


Q&A on our Screening Buckets

REMU screening bucket can be loaded fully which gives you more capacity at each scoop whilst trommel style buckets can be only filled to 1/3 of the bucket volume.

To process one bucket load takes approximately one minute. This includes whole cycle of processing starting with loading, screening, and emptying out the oversized particles. Depending on the bucket size capacities can be in the range of 10 m³/h – 250 m³/h per hour.

One operator, one machine and a screening bucket is an unbeatable combination when compared to what it takes to run a screening plant. By investing in a screening bucket, you save on investment cost, operating costs as well as fuel, maintenance and equipment transportation costs.

A reliable and robust structure keeps your machine up and running saving you time and money in both operation and maintenance. Shafts are made of highest quality steel which gives you the longest possible service life (much longer than other buckets with rubber stars or blades with that are made from lower quality steels).

A wide selection of models and our professional sales team helps to guarantee that you will get the most suitable model and configuration of screening bucket and shafts for your machine, the material you process and the end-result you require.

The design of the buckets takes in consideration that clients may be working on asphalted surfaces and the bottoms of our buckets are reinforced with wear plates.

It is very easy to learn how to operate a screening bucket. We supply a user manual with instructions for the correct use of the bucket and we will be happy to clear up any doubts you may have.

When comparing larger screening plants to smaller or average size screening buckets, some screening plants process more material per hour than screening buckets. However, a screening plant needs a wheel loader or an excavator to feed it, so you are running two machines and may need a second operator. In many cases, the hourly production of the right model of screening bucket is the same as a screening plant, but the size of the initial investment and the operating costs are just a fraction of the size. With a screening bucket, productions of 250 m3 per hour are possible.

Basic maintenance, or even changing the rotors, is easy to perform in any workshop. Daily maintenance consists of greasing the lubrication points for the bearings. Our aftersales service provides detailed instructions for all the maintenance.

Multiple series for each unique application

Screening Bucket Series

Screening buckets

Standard screening buckets

Designed to maintain an optimum ratio of bucket mass to bucket volume, we make the most of the lifting capacity of the machine to load more material. Buckets can be fitted to excavators, wheeled loaders, tractors, and telehandlers of various sizes.

Screening buckets

Crossover bucket

The crossover bucket is a totally new concept for the attachment sector: one bucket frame with multiple work modules enables a quick transition between different jobs. This is the perfect choice if you process several different materials.

Screening buckets

Extra strong screening bucket

Overcoming the challenges of pipeline projects, trench backfilling and other demanding heavy-duty applications. These buckets have a high strength frame that can take a hammering. The buckets can execute demanding applications where an extra strong structure is required.

Technical data












Screening buckets